...Vintage Running Lamps... A hard to find matching set of solid copper vintage J.H Peters & Bey port & starboard lanterns. Polished & lacquer coated metal with original fresnel lenses intact as well as the red and green insert lenses. These lanterns have been converted to 110 volts by the factory as they have the original factory electrical conversion kit installed. They are 20 inches tall and with 4 inch handles. The base of these fine running lamps measures arond 10 inches deep. A very solid german built set of maritime lanterns made in Hamburg with the serial numbers 61620 and 61621 embossed on the sides.......SOLD!!!.....Photo 1....Photo 2....Photo 3....Photo 4....Photo 5....Photo 6...Photo 7....Photo 8...
...Durkee Marine Anchor Lantern... Avast ye mateys, behold a 1940's era Durkee Marine anchor lantern built out of steel with brass trim in Staten Island New York. This lamp is in ship shape condition as it has been powder coated with a salty looking sparkle green paint. It has a 360 degree fresnel style lens and it burns oil. Could be converted to electric for a small fee as the burner pot may not be the original. This fine piece measures 19 inches tall add 5.5 when the brass handle is standing upright. The diameter is 12 inches wide...... $650.00.......Photo 2....Photo 3....Photo 4....Photo 5....
...WW2 Liberty Ship Running Lights....... A vintage WW2 era set of ships lanterns manufactured by Wilcox Crittenden of Middletown CT USA for use aboard a WW2 Liberty Ship or Victory Ship. Lanterns have the original glass lenses, green and red for port and starboard. Not painted glass like the repros have, but the real colored glass through and through like they made way back when. Rare set of steel bodied lamps have lots of sea character and should be aboard your nautical den and not someone elses. Measure 15 inches tall overall or 13 to top not including brass bale handle. They are 10 inches deep and the lenses are 8x12. One lamp still has the brass WC makers plate still attached. Steel body and brass fittings have been polished and lacquer coated....SOLD!!!.....Photo 2....Photo 3..
....Ships Brass Masthead Lamp.... This is a beautifully polished and lacquer coated brass masthead lamp mounted on a solid mahogany backboard shelf. It is heavy and built for marine weather. This lamp was salvaged, restored and mounted by the Maidhof crew. The lens says Perko on it but there are no other makers markers on the lamp itself. The back board measures 20" tall x 11.5" wide and the fresnal lens is 6" tall with abouyt a 5 inch diameter. Would make a glorius porch or entryway light. Wired for 110 electric.....$575.00......Photo 2.....Photo 3......
...Authentic USN Battleship Signal Lamp:...... Authentic WW2 era Ships Signal spotlight from a navy battleship. Solid brass including the mounting bracket and built by General Electric. In excellent working order and wired for 110 volts. Signal loovers are fully operational and ready for morris code. Lens measures about 14 inches in diameter. Lamp houseing is about 14 as well but add another 4 inches for the back handle. I have a pair of these rare and beautiful hunks of naval glory but I am willing to sell them seperate if need be.......$1,850.00 each.....Photo 2...Photo 3....Photo 4....Photo 5...
...German Masthead Lantern:... WW2 era German made ships masthead lantern. Made by Schiffslaternenwerk Ueckermunde out of galvanized steel. It is in excellent restored condition but still has the patina of a lantern with age. This oil burning marine lantern measures 12.5 inches tall or 14.25 inches including the handle. It also measures 4.5 inches wide and deep. The cereal number on the pot is 5863 and the number on the lantern is 5859. The lens measures about 3.5 inches tall. Everything on this lantern is original and what a piece it is........$475.00..........Photo 2....Photo 3....Photo 4....Photo 5.....Photo 6....
...Vintage Japanese Bow Lamp..: A classic WW2 era Japanese galvanized steel bow lantern. It says Bicoloured Light on the brass insignia and the rest is in Japanese charaters. The top serial number says 1131. It measures 11.5 inches tall and 14.5 inches when you stand up the handle. The base measures around 6 inches x 6 inches and the red and green lenses measure about 3 inches tall. This lamp has been converted to 110 volt electric and takes a small light bulb. A very neat little lanter. Polished and lacquer coated as we do with all of our fine merchandice.....SOLD!!!........Photo 2....Photo 3....Photo 4.....Photo 5....Photo 6....
...Vintage Perko Mast Head Lantern:... An American made solid brass ships mast head lantern made by Perkins Marine or Perko in Brooklyn New York. This beauty stands 16 inches tall x 9.5 inches wide including the rope loops x 8 inches deep. It has a 7 inch 210 degree clear glass fresnel lens. This lantern has been converted to a 110 volt electric plug in lamp and has also been polished and lacquer coated to look and last sharp. A real nice piece........SOLD!!!.........Photo 2....Photo 3....Photo 4....Photo 5..Photo 6....Photo 7...Photo 8....
...Brass Bulkhead Lantern... This is a nice multifunctional oil lamp made in France. It is made out of brass and can sit on a table top or be mounted on a bulkhead. It is built to be light and sturdy as well as to look boss on your yacht. Lamp measures 12.5 inches tall and 5.5 inches wide at the widest point. I have 4 of them available.......$95.00 each.......Photo 2....Photo 3...
... Gimbaled Cabin Lamp...... Made in England by the company Duplex. A very elegant ships cabin bulkhead gimbaled oil lamp. Made out of solid brass with a lead weighted base. This fine piece has been polished, clear lacquer coated and mounted on a varnished slab of mahogany. Measures about 19 inches tall overall including the chimney. It protrudes about 10.5 inches and the pot is about 5 inches in diameter. The chimney takes a 2.5" diameter piece of glass and the outer lamp shade has a base diameter of 4". The mahogany back board measures 9.5" x 5.5". The lamps bracket is solid brass as well including the anchor wall attachement.......SOLD!!!.........Photo 2....Photo 3....Photo 4.....Photo 5....
...English Saloon Lamp...... A beautiful brass saloon lantern made by Duplex in England This lamp has been converted to burn 110 volts of electricity as the oil pot no longer holds oil due to a hairline crack. A very handsome piece and this solid brass lamp is lacquer coated Measures about 22" tall x 15" wide. The chimney has a 2.5 inch diameter and the shade has about an 8" diameter at the base. It screams first class smoking room all the way......SOLD!!!....Photo 2....Photo 3....
...Brass Hurricane Lantern...... A solid brass caged all weather ships hurricane lantern. It is oil burning and built to last. A very useful and handsome lantern. Measures 15 inches tall to the top of the wood handle and is 7 inches wide x 7 inches deep. Every salty sailor needs one of these on board........$250.00.......Photo 2....Photo 3....
.... Ships Caged Bulkhead Lamp:.......A beautifully mounted solid bronze ships passageway cage lamp with a solid mahogany shelf/backboard. This lamp is a sturdy all weather indoor or outdoor lamp. It is wired for 110 volt household lighting. Plug it in or hardwire to the bulkhead/wall for a classic marine look. This lamp measures 9 inches tall x 5 inch diameter base. The board it sits on and is backed by measures 14 inches tall x 6.5 inches wide x 8 inches deep. Priced to sell at.....$275.00......Photo 2....Photo 3....Photo 4....
...Copper Ships Trawler lamp....... A Solid copper and brass ships trawler lamp. A very well made replica that measures about 21 inches tall or 28 including the handles. It is about 12 inches in diameter at the widest part of the globe lens. It has been convered to 110 volt electric. A very handsome looking light fixture built to be around the salt air........$375.00.........Photo 2....Photo 3....Photo 4....
...Seahorse Running Lanterns...A very handsom pair of British made Seahorse port and starboard lanterns. Made from solid copper and brass. They are all original with slide out removable pots and ready to burn oil. Beautifully polished and lacquer coated for protection. These lanterns measure 10 inches tall and about 5 inches wide.......SOLD!!!........Photo 2....Photo 3....Photo 4....Photo 5....
...Passageway Lamp......A solid brass ships passageway caged lamp mounted on a boss steel shelf. A true hunk of salvaged glory. The caged lamp itself measures about 11 inches tall x 4.5 inches in diameter and it is solid brass. The salty looking steel backboard shelf measures 18"x 8.5" . Professionally painted, polished and lacquer coated. Burns on standard 110 volt electricity......$295.00.......Photo 2....
...Solid Brass Running Lamps...... A sturdy large sized set of port and starboard runng lamps made of solid brass. Beautifully polished and lacquered for protection. Also wired for 110 volt electric. They measure 18 inches tall and 10 inches deep. Priced to sell fast......SOLD!!!.......Photo 2....Photo 3....
... WWII Liberty Ship Masthead......An authentic World War II Liberty Ship masthead lamp. Made out of solid cast brass and a thick fresnal lense. We have polished restored and mounted this heavy lamp onto a inch thick piece of varnished mahogany. Measures 12 inches tall including the wood base and it has a 6 inch diameter fresnal lense. The base is covered in felt as not to scratch up your large captains desk or other hunk of Maidhof ships furniture.......SOLD!!!.......Photo 2....Photo 3....
Keep your bloodshot eyes on this page mate, because what you have just spied is only the tip of the iceberg. We are sifting through our hoard of rarities everyday and the Ship's Lamp Locker will be laden down with loads of scarce marine lighting fixtures salvaged from seaports around the world.....
TAKE HEED MATES: Temptation abounds aboard these decks and many a good sailor has joyfully succumbed .....
.....
